Flexible Row PCBs (Unpopulated)

Single sheet of 4 or 5 rows by 6 columns. 

This design will accommodate all MX footprint key switches. It is recommended to use 5 pin switches as hot swap sockets do not provide rigidity.

Row wiring requires 30awg 4p/5p silicone wire. 30cm is included with each sheet.
If wired is selected rows will have 45mm spacing between each and at the termination side 95mm for connection to MCU or break out board.

The pcb is compatible with both Gateron and Kalih designed MX hot swap sockets.
Switching diode footprint is SOD-323 such as BAS316 or 1N007WS diodes.
CD4148WSP 0805 does work but the pad size isn't specific to this diode type.

Compatible with most Dactyl designs.